How to configureWiz550S2E/Wiz550WEB using WIZnet Configuration Tool

Introduction

This post introduces the usage of configuration tool for WIZnet Product  Wiz550S2E / Wiz550WEB. This configuration tool provides two ways to configure our product in GUI mode and Command line mode, so users can choose a way depending on their convenience.

For example, if you want to test several functions or changes on a product, then GUI mode would be a better choice. In the other hand, if you want to update same information of multiple products in factory repeatedly, then Command line mode would be much better and convenient.

This post will shows how to use the configuration tool in GUI mode and Command line mode.

Before starting, refer following link for creating runnable jar file for our source code.

Exporting Runnable Jar from project for WIZnet Configuration Tool

 

Gui Mode

In order to use GUI mode, execute runnable jar without arguments

tool_dsc1

tool_dsc2

  1. Connect modules which will be configured
  2. Click [Search] to find connected modules.
  3. Run other functions as you need.
    • Setting : update changed information
    • F/W Uploading : upload firmware using TFTP server
    • Reset : reset module
    • Factory Reset : reset module as factory setting

Command Line Mode

When you want to configure modules in Console Mode, then use argument with runnable jar file in command line.

Search Modules

tool_dsc3

-b : search available modules and display found modules

Firmware Upload

tool_dsc4

-m : designate mac address

-f : firmware filename to be uploaded on module

-s : TFTP server address

-t : TFTP server port [default:69]

-p : setting password of module

to upload new firmware on module, the module has to be set up with correct network information (and TFTP server should be reachable).

e.g) If TFTP server address is 192.168.111.110

Module’s IP should be 192.168.111.*

 

Functions with parameters

Users can change module’s information manually using parameters.

Parameter Format

Command[2Letters] Data

Command and data should be concatenated.

E.g) IP192.168.111.248 DH1 BR115200

Command List

Command Data Description
DP Display Information
RT Reset Module
FR Factory reset
MN WIZ550SE, or WIZ550WEB.. Model name
LI Local IP address
SM Subnet mask
GW Gateway
HI Host IP address
LP Local port number
RP Remote host port number
WO CLIENT(0)/SERVER(1)/MIXED(2)/

UDP(3)

Working mode
IT Inactivity timer(0~65535ms)
RI Reconnect interval(0~65535ms)
BR 300/600/1200/1800/… 115200.. Baud rate
DB 7/8/9 Data bits
PR NONE(0)/ODD(1)/EVEN(2) Parity
SB 1/2 Stop bits
FL NONE(0)/RTSCTS(1)/RS422(2)/

RS485(3)

Flow control
AT Enable(1)/Disable(0) AT Command
TC FFFFFF Trigger cod(fixed 3 bytes in hex)
PT Serial data packing interval

(0~65535ms)

PS Packing size(0~255)
PL 0/1/2/3/4 Packing delimiter length
PD FFFFFFFF Packing delimiters in hex(max 4 bytes)
PA 0/1/2 Packing data appendix
DH Enable(1)/Disable(0) DHCP flag
DN Enable(1)/Disable(0) DDNS flag
DS DNS server IP
DO Domain
NP Connection password
SP Setting password

Reset Module

tool_dsc5

-m : designate mac address

-p : setting password

RT : command to reset

 

 

Factory Reset Module

tool_dsc6

-m : designate mac address

-p : setting password

FR : command to factory-reset

Display Module’s Information

tool_dsc7

-m : designate mac address to manipulate

-p : setting password

DP : command to display module

 

Change Module’s Information

tool_dsc8

tool_dsc9

-m : designate mac address

-p : setting password

[parameter list]: command and data sets to be applied

e.g)

DH1 (enable DHCP),

MNWIZ550S2E_TEST(set Module name as WIZ550S2E_TEST)

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s