IoT5500 LanJack

IoT5500-hm

The Internet of Things embedded Ethernet connectivity module IoT5500 comes in a very compact footprint, barely any larger than the Ethernet socket. As the base module it can be connected directly to a host system via SPI or with the optional CPU+SD thin-stack module becomes a network server offloading the burden of network operations as a smart peripheral. Even more importantly too is that is very cost effective even when compared to many serial to Ethernet only solutions alone.

Based on the WIZnet W5500 hard-wired TCP/IP Ethernet chip the module is both compact and easy to interface to via SPI and is footprint compatible with the older W5200 based WIZ820io module.

IoT5500-P8-Q

IoT5500 Features

  • WIZnet W5500 with eight hard-wired TCP/IP sockets
  • Simple 4-wire SPI interface
  • 32kB on-chip buffers
  • Through hole or SMD PCB flush mounting (0.8mm substrate)
  • 1″ x 0.9″ x 0.67″ deep
  • 10g (13g with +P8)

IoT5500

Source : https://docs.google.com/document/d/1Io0_RNINWn92OfVs32uL4ywK0gnyaRyuxdijwtPrSvI/pub

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s